Find the answer to common industry questions. If you can't find what your 
looking for, simply ask us a question and we'll get back to you.


Just select desired category to narrow down the list.

Question: How are jewelry molds made with rapid prototyping methods or processes?


The recent introduction of Castaldo®’s VLT™ (Very Low Temperature) molding rubber opens the way to a new time-saving process for jewelry prototyping using molding, by Objet Eden™ 3D Printers Systems. The new rubber allows Objet users to utilize their PolyJet™ patterns as master models for rapid jewelry prototyping and mold them in as little as one hour. This eliminates the need to go through the time-consuming process of creating a metal master model in the jewelry prototyping process.

Direct casting of resin models made by most rapid prototyping systems do not burn out cleanly. However, using cold-mold compounds that do not damage the pattern and an RP system that supports the specialized material offers the perfect alternative for rapid jewelry prototyping.

Another recently developed alternative method involved making a liquid rubber mold of the model, curing it overnight, injecting the wax, and then casting the wax (another overnight process) to get the master model. Finally, they make a traditional rubber mold, shoot waxes, and start production casting. All together, the process would take more than two days.

Many casters, while still preferring to make a mold of the resin model and shoot waxes are unhappy with the long curing times: quite simply, they want to make their jewelry prototype models as fast as possible. 

New Methodology

Now this entire process of rapid jewelry prototyping can be done in less than half the time. Rubber can be cured at temperatures ranging from 160°F (71°C) to 180°F (83°C), well below the softening point of most resin materials. At a temperature of 160°F, a standard 3/4-inch mold will be cured and ready for injection in 90 to 120 minutes. At 180°F, that time is further reduced to just 30 to 45 minutes. However, as with traditional casting rubbers, longer curing times mean better molds – the longer the cure, the more likely it is that the rubber will flow into every nook and cranny of the jewelry model to provide detail. In addition, when VLT™ rubber cures, it shrinks just 1.4 percent.

Perhaps one of the greatest benefits of VLT™ rubber in the jewelry prototyping process is that it makes rapid prototyping more useful for mass production. Specifically for the jewelry industry, enabling PolyJet™ models to be used directly as master models is an important development because it offers significant time savings in a market where time can be a vital competitive edge.


On a practical level, it is too expensive and time consuming to run a rapid prototyping machine a thousand times in order to create the high number of castings needed. Now, with VLT™ rubber and PolyJet™, a prototype piece can be directly molded, and the subsequent wax models can be used to make thousands of castings.

VLT™ rubber also works well with traditional hand-carved waxes and is designed specifically for molding – i.e. it acts like any other molding rubber, only at much lower temperatures.

Essentially, the VLT™ and PolyJet™ methodology leverages traditional technology, tools, and techniques. This means there is no need to learn anything new, buy new equipment, or train people in new techniques. If you are already doing lost-wax casting, the VLT™ and PolyJet™ methodology fits right in.

How does Jewelry Prototyping work with VLT™ ?

Castaldo®  VLT™ Silicone Molding Rubber can be vulcanized at any of a wide range of time and temperature combinations, depending on the characteristics and requirements of the model material. Below are some suggested combinations for a typical mould that is 3/4" / 19 mm thick.

88° C / 190° F for 30 minutes

82° C / 180° F for 45 minutes

76° C / 170° F for 60 minutes

71° C / 160° F for 90 minutes

The only change from established mold making techniques required by Castaldo® VLT™ Silicone Molding Rubber may be the need to coat the plastic model with a release spray before vulcanizing to ensure easy release of the model after vulcanization. Teflon® (PTFE) sprays work very well, as do common household cooking oil sprays made with olive oil or canola oil, such as PAM®. Wax models do not need to be sprayed.

Tools and technology

The VLT™ and PolyJet™ methodology utilizes the simple tools and easy technologies you already have and know how to use.

Easy to work with

VLT™ Silicone Molding Rubber has the consistency of modeling clay or putty, reducing mould packing time to a few minutes. There is no need to cut and shape the pieces to fit the mould frame. Merely pull off a piece with your fingers and push it into the mould frame as desired.

Easy to cut

Molds made of VLT™ rubber are firm, yet they “cut like butter”.

Minimal shrinkage

Rubber shrinkage is only 1.4%

Easy, spray-less release of wax injections

Finished molds require no mold release spray. Wax patterns release easily because the rubber already contains anti-stick compounds.

High-shine finish

Molds made of VLT™ rubber provides waxes with an extremely shiny finish, reducing the polishing work required on your casting.

High tear strength

For a silicone rubber compound, VLT™ rubber is exceptionally high in tear strength, meaning that molds made from it last for years.

Cheaper and easier than RTVs

Room temperature vulcanizing (RTV) compounds require exact measuring and exact mixing. They have limited working times and require vacuum de-bubbling to provide usable molds.

VLT™ Rubber Specifications


Regular strips: 18" x 2 7/8 " x ~3/8" (45.7cm x 7.3cm x ~6mm). Packaged in 5lb (2.27kg) cartons.

Double-wide strips: 18" x 5 3/4" x ~3/8" (45.7cm x 14.5cm x ~6 mm). Packaged in 10Ib (4.5kg) boxes.


As with any unvulcanized rubber compound, store away from any source of heat and light. Unvulcanized shelf life is at least one year if properly stored.

Jewelry Prototyping & VLT™ Processes

Castaldo® VLT™ Silicone Molding Rubber is compatible with all mold making techniques, including mold cutting and powder and cream separation molds. It is particularly adaptable to the powder and cream separation processes since the parting line is so easily controlled. For patterns strong enough to resist some pressure, merely push the model into rubber to the desired point. If not satisfied with the results, remove the model, smooth the rubber over with your finger or tool and re-insert the model.


Objet Geometries LTD is not responsible for misuse of our products or their use in conjunction with unsafe or improperly maintained equipment or for uses other than intended as jewelry casting mold making material. 


Figure 1: The VLT™
Silicone Molding Rubber.



Figure 2: Placing the Objet model inside the mold.


Figure 3: Finished mold can be complex with even spiral plugs. 


Figure 4: The resin Release Spray.


Figure 5: Objet Jewelry Models.

















Silicone Molding Rubber is  soft and pliable,
with a  consistency like putty or  molding clay.

Place the Objet model inside  
the Silicone Mold.

Placing and embedding the  
rubber unto the model. 

Curing Silicone Jewelry Molding Rubber Molds
involves no  mixing, and at low temperature.

The Silicone Jewelry Molding  Rubber Molds
are then to be  cut and opened by hand.


Parting lines are easily  controlled
and corrected  by hand when used
with the  powder separation.

Finished molds can be  complex with
ores, straight  plugs or even spiral plugs.


Previous Question Back to List Next Question

If you didn't find the answer to your question, please fill out the form below and we'll make sure you receive the information you need promptly.

First Name
Last Name
Your email
Your Tel
Communication Consent

I wish to receive the Proto3000 newsletter containing new product releases, 
new materials, industry information, and innovation stories.


3D Printer Demo 3D Printer Quote        3D Scanner Demo 3D Scanner Canada        3D Printing and Rapid Prototyping Services SLA FDM Polyjet Rubber SLS Nylon        Engineering News 3D Printing News        3D Printer Price 3D Scanner Price 3D Printing Services Price