True Additive Manufacturing
Fortus Production Systems are the next big thing in manufacturing. With production grade materials, Fortus 3D Printers can turn your CAD data into real parts. These parts are tough enough to be used as advanced concept models, functional prototypes, manufacturing tools, and end-use parts.
Developed for Demanding Applications
The Fortus 360mc was designed for high accuracy rapid prototyping and direct digital manufacturing. The system is equipped with an extrusion head that maintains tight positional accuracy and can produce parts with high tolerance.
| · High Accuracy and repeatability
· High resolution and feature detail
· Two build envelope options
· Multiple build colors
· Variety of Materials to choose from
Fortus 360mc Production 3D System Specifications
The Fortus 360mc uses FDM modeling technology to create 3D models of thermoplastic materials. Its robustness and material selection allows for it to be used in a range of applications, such as Concept Modeling, Functional Prototyping or producing Manufacturing Tools or End-Use Parts. The unit comes with Fortus Pre-Processing Software letting you prepare 3D digital files for production right at your desk. The Fortus 360mc system creates your model using thermoplastic and support materials in front of your eyes. You may remove the support materials by hand or in a water solution.
High accuracy and repeatability
High resolution and feature detail
Two build envelope options
Multiple build colors
The two configurations of the Fortus 360mc 3D Production System have different build sizes and material bays, but both were designed for the most challenging applications.
Soluble Support for ABS-M30 and PC-ABS
Breakaway Support for PC
355 x 254 x 254 mm (14 x 10 x 10 in.)
1 build material bay
1 support material bay
+/- .127 mm (+/- .005 in.)
or +/- .0015 mm per mm (+/- .0015 in. per inch)
whichever is greater*
Multiple build speed options for fine feature detail
and smoother surface finish
0.330 mm (0.013 in.)
0.254 mm (0.010 in.)
0.178 mm (0.007 in.)
0.127 mm (0.005 in.)
10/100 base T connection. Ethernet protocol
230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required)
Special Facility Requirements:
* Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.
(Same as Configuration 1, except:)
406 x 356 x 406 mm (16 x 14 x 16 in.)
2 build material bays
2 support material bays
Get the Fortus Finishing Touch Smoothing Station with the Fortus 360mc. The Finishing Touch Smoothing Station uses a semi-automated process for surface finishing of FDM (Fused Deposition Modeling) parts.
Prepare Parts for Finishing
Whether you're creating concept models, patterns or end-use parts, make them even smoother with the Fortus Finishing Touch Smoothing Station. It does not affect accuracy of your models.
Use Finishing Touch as part of your 3D manufacturing process to prepare parts for:
- Silicone molding masters
- Surface sealing
- Sand casting
- Investment casting
- Vacuum metallization