Using triple-jetting technology, the Objet260 Connex2 creates stunning prototypes that closely resemble finished products. Combining as many as 27 material properties into a single part, the Objet260 Connex2 significantly cuts down time-consuming assembly.
Similar to other Stratasys printers, the Connex2 boasts an amazing 16-micron layer resolution, perfect for printing complex geometries with smooth surfaces and thin walls. Like all the triple-jetting 3D printers, you can replace empty cartridges mid-print without interrupting your job.
120 Materials To Choose From
By combining certain materials in specific concentrations, you can produce dozens of digital materials. Each of these mixtures can vary in translucency, rigidity, finish and thermal resistance. Up to 27 materials can appear in one prototype with absolutely zero assembly required.
With the Objet260 Connex2 you can produce prototypes in strong, two-component Digital ABS and complete your designs with a third base material, perhaps to simulate overmolding or allow for light transmission.
Two tough single material options that are designed to withstand the stress of living hinges, closures, and snap features. Combine these features with a High Temperature material for added heat resistance.
The heat-resistant material is ideal for thermal testing of static parts. This can be used in tandem with Rubber materials to achieve a range of Shore A values.
Medical-grade rapid prototyping materials offer excellent detail visualization and great stability for applications such as dental delivery trays, surgical guides and hearing aids.
With a wide range of opacities and flexibility characteristics, this adaptable material is ideal for creating a variety of prototypes including soft grips and shoe prototypes.
Rigid Opaque (VeroWhitePlus, VeroBlackPlus, VeroGray and VeroBlue)
Rubber (Tango family)
Transparent (RGD720 and VeroClear)
Simulated Polypropylene (Endur and Durus)
High Temperature (RGD525)
Digital ABS and Digital ABS2
Wide range of translucencies
Rubber blends in a range of Shore A values
Simulated Polypropylene materials with improved heat resistance
FullCure 705 non-toxic gel-like photopolymer support
Eight sealed 3.6 Kg (7.9 lbs) cartridges
Three different model materials can be loaded simultaneously in the high-capacity material cabinet, and can be hot-swapped.
Net build size:
255 × 252 × 200 mm (10.0 x 9.9 x 7.9 in.)
Horizontal build layers as fine as 16 microns (0.0006 in.)
X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi
20-85 µm for features below 50 mm; up to 200 µm for full model size (for rigid materials only, depending on geometry, build parameters and model orientation)
Windows 7 32/64-bit
LAN – TCP/IP
Size and weight:
870 × 735 × 1200 mm (34.25 × 28.9 × 47.25 inches); 410 kg (902 lbs)
330 x 1170 x 640 mm (13 x 46.1 x 26.2 in.) 76 kg (168 lbs)
110–240 VAC 50/60 Hz; 1.5 KW single phase
Temperature 18-25 °C (64-77 °F); relative humidity 30-70% (non-condensing)