MAKERBOT

REPLICATOR+

Engineered and Extensively Tested for Reliable, Faster 3D Printing

The all-new MakerBot Replicator+ desktop 3D printer combines unparalleled performance with superior results and lasting reliability. The Replicator+ 3D prints high-quality concept models 30% faster, easier, and with a 25% bigger build volume than it’s predecessor.

Standardized Features for Easy Accessible 3D Printing 

To ensure easy, accessible 3D printing, the MakerBot Replicator+ desktop 3D printer comes with the Smart Extruder+ and all the standard features you would expect from an advanced technology including an LCD display, an on-board camera, as well as USB, Wi-Fi, and Ethernet connectivity.

Explore the MakerBot Replicator+ by watching the video 

 Key Features

Flexible Connectivity

Send print files to your 3D printer via Wi-Fi, USB, Ethernet, or with a USB drive. Control your printer via MakerBot Print or remotely with MakerBot Mobile.

Speed

Print approximately 30% faster than the MakerBot Replicator Desktop 3D Printer

Larger Build Size

Print up to 11.6″ x 7.6″ x 6.3″ – 25% larger than the original MakerBot Replicator, for printing a bigger model or more prints at a single time.

Durability

To ensure consistent performance, our new 3D printers and their subsystems were re-engineered and rigorously tested for over 380,000 hours across multiple facilities.

Optimized for MakerBot PLA Filament

Safe for the office, classroom, or home, this filament is non-toxic and easy-to-print with minimal warping or curling. The Replicator+ and our software are tuned to provide the highest quality and results with this filament

SHOP MAKERBOT PLA FILAMENT

Advantages

Standardized Features for Easy 3D Printing

The MakerBot Replicator+ desktop 3D printer comes packed with features to ensure easy, accessible 3D printing such as a modular extrusion system design to keep up with material advancements and hardware improvements. In addition, an on-board camera, LCD display as well as connectivity via Wi-Fi, USB and Ethernet keep you connected to your 3D prints no matter where you are.

Pair the system with advanced software such as MakerBot Print and MakerBot Mobile to take full advantage of wireless cloud-enable connectivity and the ability to import native CAD files, auto-arrangement and multi-printer printing.

Engineered and Tested for Greater Reliability

The MakerBot Replicator+ prints 30% faster than its predecessor while offering a 25% larger build volume. Improved hardware, like a redesigned gantry and z-stage delivers greater reliability and accuracy in every print job.

To ensure consistent performance, our new 3D printers and their subsystems were re-engineered and rigorously tested for 380,000+ hours across multiple facilities.

Print with Confidence

With the new Grip Surface, prints adhere better, resulting in reduced warping and curling- without the need of blue tape. Prints are easily removed as the Flex Build Plate is bendable and allows your part to snap off with ease. The build plate is also factory-leveled so your Replicator+ is ready to go right out of the box.

Materials

MakerBot PLA Filament

Optimized to give you the best results with your MakerBot 3D Printer

SHOP NOW

MakerBot Tough PLA

Print durable, high-impact strength prototypes and fixtures

SHOP NOW

 Technical Specifications

Print Technology
Print Technology
Fused Deposition Modeling (FDM)
Build Volume
Build Volume
29.5 x 19.5 x 16.5 cm (11.6 x 7.6 x 6.5 in)
Minimum Layer Resolution
Minimum Layer Resolution
100 microns [0.0039 in]
Maximum Layer Resolution
Maximum Layer Resolution
400 microns [0.0157 in]
Build Plate Leveling
Build Plate Leveling
Factory Leveled
Build Surface
Build Surface
Grip Surface
Filament Diameter
Filament Diameter
0.069 in [1.75 mm]
Extruder Compatibility
Extruder Compatibility
Smart Extruder+, Tough PLA Smart Extruder +
Filament Compatibility
Filament Compatibility
MakerBot PLA Filament Large Spool 0.9 kg [2.0 lb], MakerBot Tough PLA Filament Large Spool 0.9 kg [2.0 lb]
Camera Resolution
Camera Resolution
640 x 480
Software Bundle
Software Bundle
MakerBot Print Software, MakerBot Mobile
Supported OS for MakerBot Print
Supported OS for MakerBot Print
Windows 7 & 10, Mac OS X (10.9+), No Linux Support
Connectivity
Connectivity
Wi-Fi, Ethernet, USB
Product Dimensions
Product Dimensions
20.8 x 17.4 x 16.2 in [52.8 x 44.1 x 41.0 cm]
Product Weight
Product Weight
40.4 lbs [18.3 kg]

Shop Now

Shop online for all your MakerBot needs. New products, accessories and materials all in one place.

shop now