Used 3D Printing Systems

Stratasys F900 has the largest build chamber of any Stratasys FDM (fused deposition modeling) printer. It provides the space needed to print large parts or multiples of smaller parts in a single-build operation. F900 offers the broadest selection of polymer materials, from standard plastics to high-performance ULTEM and PEKK-based materials.

You can produce demanding functional prototypes, production parts, jigs, fixtures and factory tooling with unmatched accuracy, repeatability, and predictability.

• System Size & Weight
  • 2,772 x 1,683 x 2,027 mm (109.1 x 66.3 x 78.1 in.); 2,869 kg (6,325 lbs.)
    With Manufacturing Light Tower: 2,772 x 1,683 x 2,281 mm (109.1 x 66.3 x 89.8 in.)
• Achievable Accuracy
  • Parts are produced within an accuracy of +/- .089 mm or +/- .0015 mm per mm, whichever is greater (+/- .0035 in. or +/-.0015 in. per in., whichever is greater). Z part accuracy includes an additional tolerance of -0.000/+ slice height.
  • Note: Accuracy is geometry-dependent.
• Network Communication
  • 10/100 base T connection
  • Ethernet protocol
• Power Requirements
  • 230 VAC (three phase) 50/60Hz, 40 Amp circuit
• Additional Requirements
  • Compressed air required: 90-120 psi with a minimum flow of 20 CFM.
• Software
  • All Fortus® systems include Insight and Control Center™ job processing and management software. Compatible with GrabCAD Print and GrabCAD Print Pro for use with job reports, scheduling, and remote monitoring. U.S. government agency STIG compliance via Stratasys ProtectAM technology is powered by Red Hat® Enterprise Linux® software.
• Operating System
  • Windows 10 and newer, Windows Server 2016 and newer. Only 64-bit versions of Windows are supported.

• Fused Deposition Modeling | FDM

ETEC EnvisionOne is a powerful desktop DLP (digital light processing) 3D printer with patented cDLM (continuous digital light manufacturing) technology, enabling breakneck print speeds with little to no delay between layers. This technology is a s

With a wide range of compatible materials, a simple Envision One RP software workflow, and a precision light engineer, the EnvisionOne delivers exceptional speed, print resolution, surface finish, and part mechanical properties.

• BUILD ENVELOPE (MAX PART SIZE)
  Envision One – 180 x 101 x 175 mm
• XY RESOLUTION
  Envision One – 60 μm with patented Pixel Tuning
• Z RESOLUTION (MATERIAL DEPENDENT)
  Envision One – 50–150 μm
• LED Light Source
  • 385nm wavelength
• Footprint
  • 15.4 x 16.93 x 25.02 in. (39.1 x 43 x 63.6 cm)
• Electrical Requirements
  • 110/220 VAC 50/60 HZ 5A

• Continuous Digital Light Manufacturing | cDLM
• Digital Light Processing | DLP
  • Parts that are manufactured via cDLM are made up of entangled long-chain polymers, thus resulting in fully isotropic parts, something that cannot be achieved via the FDM process.

The Formlabs Form 3L is a large-format stereolithography (SLA) 3D printer designed to enable your product development and design teams to bring their biggest ideas to life. Powered by Formlabs’ patented Low Force Stereolitography™.

IDEAL FOR

• Full-scale rapid prototyping and product development
• Tooling and manufacturing aids
• Casting and mold patterns
• Concept modeling

SPECS

• Build Volume – 33.5 × 20 × 30 cm (13.2 × 7.9 × 11.8 in)
• Layer Thickness – 25 – 300 microns (.001 – .012 in)
• Resin Cartridges: 2 (two )
• Supports: Auto-generated light-touch support removal
• Printer Dimensions (W × D × H)
  • 90 × 96 × 104 cm | 35.4 × 37.8 × 41 in
• Internal Temperature
  • Auto-heats to 35 °C / 95 °F
• Temperature Control
  • Air-heated print chamber
• Operating Environment
  • 18 – 28°C / 64 – 82°F
• Power Requirements
  • 100–240 VAC
  • 8.5A MAX
  • 50/60HZ
  • 650W
• Laser Specifications
  • 2 Light Processing Units
  • EN 60825-1:2007 certified
  • Class 1 Laser Product
  • 405 nm wavelength
  • 250 mW power
  • 85-micron (0.0033 in) laser spot
• Connectivity
  • Wi-Fi (2.4, 5 GHz)
  • Ethernet (1000 Mbit)
  • USB 2.0

•  Powered by Low Force Stereolitography™ [Improved Stereolithography (SLA)]

The HP 4200 MJF 3D printer is ideal for industrial prototyping and final part production. With this system, you can achieve predictable print time and parts with best-in-class isotropy.

• Effective Build Volume
  • 380 x 284 x 380 mm (15 x 11.2 x 15 in)
• Building Speed
  • Up to 4115 cm³/hr (251 in³/hr)
• Layer Thickness
  • 0.08 mm (0.003 in.)
• Included Software
  • HP SmartStream 3D Build Manager,
  • HP SmartStream 3D Command Center
• Certified Third-party Software
  • Autodesk® Netfabb® with HP Work-space, Materialise Build Processor for HP Multi Jet Fusion technology,  Siemens NX AM for HP Multi Jet Fusion technology
• Processor & Memory
  • Intel® Core™ i7 4770TE (2.3 GHz, up to 3.3 GHz)
  • 16 GB DDR3
• Dimensions (W x D x H)
  • 2210 x 1200 x 1448 mm (87 x 47 x 57 in.)
• Weight
  • 750 kg (1653 lb)

• Multi Jet Fusion | MJF