LOCTITE IND 402-clips_Proto3000

Henkel® LOCTITE® IND402™

Henkel® LOCTITE® IND402™

Henkel® LOCTITE® IND402 is a single component elastomer material with high elongation and high resilience, excellent tensile strength, and high energy return. Parts can be printed on various Digital Light Processing (DLP) and Continuous Digital Light Manufacturing (cDLM) systems and do not require thermal post-processing.

freefoam 3d printed foam material example

FreeFoam™

FreeFoam™

FreeFoam™ is an expandable photopolymer resin that contains dispersed heat-activated foaming agents that can be 3D printed into parts with Digital Light Processing (DLP) 3D printing technology. After printing, FreeFoam parts are briefly placed into an oven which creates closed cells that expand the part from 2 to 7 times its original size.

ETR90 3D printed part

Adaptive3D™ Elastic ToughRubber™ 90 (ETR90)

Adaptive3D™ Elastic ToughRubber™ 90 (ETR90)

Adaptive3D Elastic ToughRubber™ 90 (ETR 90) is an elastomeric material with a tough, rubber-like performance, allowing for the 3D printing of parts previously made from technical foams, rubbers, or polyurethanes.

ETR70 elastic toughrubber 3D printed part

Adaptive3D™ Elastic ToughRubber™ 70 (ETR70)

Adaptive3D™ Elastic ToughRubber™ 70 (ETR70)

Elastic ToughRubber™ 70 is flexible and has an excellent elongation to break performance snapping back to shape each time. It is the perfect elastomer for shoe midsoles and heel cups, seals, door boots, bellows, foam-like lattice structures and impact parts.

Soft ToughRubber adaptive 3D

Adaptive 3D™ Soft ToughRubber™

Adaptive 3D™ Soft ToughRubber™

Adaptive 3D® Soft ToughRubber™ is an innovative polymer resin that enables customers to produce flexible end parts and products at scale with high accuracy, isotropic properties, and great printability. This elastomer ensures the silicone feel and mechanical properties of the DLP® printing’s resolution and surface finish even when manufacturing complex geometry parts or models.