Image of Formlabs Rigid 4000 resin cartridge with a 3D-printed fan on top

Formlabs® Rigid 4000

Formlabs® Rigid 4000

Discover Formlabs’ Rigid 4000, the cutting-edge SLA 3D printing material engineered to rival the stiffness of thermoplastics like PEEK (Polyetheretherketone) and PEKK. It is ideal for producing stiff, strong end-use parts with a smooth, polished finish, capable of withstanding minimal deflection.

Image of PU Rigid 1000 resin cartridge and bottle form Formlabs

Formlabs® PU Rigid 1000

Formlabs® PU Rigid 1000

PU Rigid 1000 SLA 3D printing material is formulated with a hybrid chemistry which allows it to be compatible with Formlabs SLA 3D printers. Parts produced with PU Rigid 1000 have exceptional impact strength and the physical properties of polyurethane, thus making it ideal for end-use applications that are intended to be exposed to harsh conditions. Also, this resin has been evaluated as a skin contacting device in accordance with ISO 10993-1.
Disclaimer | For commercial and research use only. Not for use in or around households or residences, or for recreation purposes, or outside of a commercial or research facility or institution.

Image of PU Rigid 650 resin cartridge and bottle form Formlabs

Formlabs® PU Rigid 650

Formlabs® PU Rigid 650

PU Rigid 650 resin from Formlabs is a polyurethane material specifically formulated to withstand extensive testing and perform under stress. 3D-printed parts with this resin are pliable, yet tough and impact-resistant that are capable of maintaing dimensional accuracy under stress.
Disclaimer — For commercial and research use only. Do not use this material in or around households or residences, or for recreation purposes, or outside of a commercial or research facility or institution.

Image of 3D printed molds and parts with High Temp resin from Formlabs

Formlabs® High Temp

Formlabs® High Temp

High Temp resin is an ideal stereolithography material for applications that require high thermal stability such as molds and inserts, parts exposed to hot air, gas, and fluid flow, as well as heat-resistant mounts, housings, and fixtures. It is the material with the highest heat deflection temperature (HDT) of 238 °C @ 0.45 MPa in Formlabs’ library of liquid photopolymers.

3D-printed part with Elastic 50A resin by Formlabs

Formlabs® Elastic 50A V2

Formlabs® Elastic 50A V2

Formlabs’ Elastic 50A V2 resin is ideal for prototyping parts that normally would be produced with softer rubbers or silicones. It is a translucent elastomer with a 50A Shore durometer that allows 3D-printed parts to bend, stretch, compress and hold-up to repeated cycles without tearing, and spring back quickly to their original shape.