Elastic ToughRubber™ 90 by Adaptive3D
Material safety data sheet Elastic ToughRubber™ 90 | Adaptive3D
Read MoreETEC DuraChain™ Photopolymers
Adaptive3D Elastic ToughRubber™ 90 (ETR 90) is an elastomeric material with a tough, rubber-like performance, allowing for the 3D printing of parts previously made from technical foams, rubbers, or polyurethanes.
E-RE90 is one of the toughest elastomers on the market with high performance that is ideal for a multitude of end parts, products, and functional prototypes such as midsoles, heel cups, seals, and door boots, foam-like lattice structuring, or tough enclosures. It is also recommended for vibration isolation parts due to its extraordinary damping properties.
Key Features and Benefits
ULTIMATE TENSILE STRENGTH
14 MPa
TEAR STRENGTH
38 kN/m
ASTM D624 Die C
HARDNESS, A SCALE
Shore A, 92
VISCOSITY
7900 cP (centipoise)
Strength | |
Silicone Feel & Mechanical Properties | |
Elasticity |
Viscosity |
Viscosity7900 cP |
Liquid Density |
Liquid Density1.038 g/mL |
Hardness |
HardnessShore A, 92ASTM D2240 |
Glass Transition (DMA) Low |
Glass Transition (DMA) Low-62°C |
Glass Transition (DMA) High |
Glass Transition (DMA) High86°C |
Fracture Toughness |
Fracture Toughness17.9 MJ/m3 |
Ultimate Tensile Strength |
Ultimate Tensile Strength14 MPa |
Tear Strength |
Tear Strength38 kN/m |
Elongation at Break |
Elongation at Break190%ASTM D638 Type V |
Bayshore Resilience |
Bayshore Resilience49% |
Bio-Compatibility Testing |
Bio-Compatibility TestingPassed for:
|
Material safety data sheet Elastic ToughRubber™ 90 | Adaptive3D
Read More